The aluminum wire aging furnace includes a time-effect furnace body and a gas direct heating device. The gas direct heating device includes an incineration control valve group, a combustion air blower and a pipe, and a gas burner. The connected incineration chamber and the radiator are connected with the hearth of the aging furnace. The layout of this useful new model is simple. After the gas is completely incinerated in the incinerator and the heat sink in the furnace, the high-temperature incinerated products will be converged in the circulating air flow in the furnace at a low temperature (about 200 ° C) to ensure a safe and reliable production. .
Structure of aluminum wire aging furnace:
The structure of aluminum wire aging furnace is composed of furnace body, heating device, control system and other parts.
The aluminum alloy aging furnace surrounds a large space, and the furnace is closed by the front door and the rear wall, forming a space for hot air exchange with the aluminum profile. The outside is made of A3 steel plate, which is welded continuously and reinforced with profiled steel. The strength is satisfactory and the air tightness is good. Then choose our factory's unique color paint, beautiful and useful. The inner panel is made of A3 steel plate, which is a habitual thermal change of steel plate at normal temperature to 250 ° C.
The furnace door adopts the guide rail type planning, and the furnace door is closed by the furnace door's own weight to ensure that the hot air does not leak out during heating. The furnace door is opened and closed with a cycloid reducer unit, supplemented by a counterweight, and the self-locking of the electromagnetic brake motor is used to prevent the furnace door from falling down and ensure safe operation.
The material cart is welded by section steel. The furnace is heated by the material cart entering the furnace. The material cart is driven by a cycloid pin gear reducer and sprocket. The material cart traverses the track and is stable and reliable. The rail and the material frame inside the material cart are made and installed by the buyer.
The furnace uses a gas incinerator for heating, and the heated air is sent to the air outlet on the material cart by a double suction circulation fan, and is sprayed to the products to be heated through the fire air outlet. The flue gas is discharged through the chimney to maintain normal incineration. The temperature in the furnace is measured by the thermocouples that are reasonably distributed before and after the furnace side, and the size of the firepower is controlled.